News -

Home / News (Page 29)

Adjustment methods of the elevator hall door
13-04-2020
1. Use dust removal equipment to remove dust and debris from the elevator hall door, and use a 300-400 mesh sandpaper to grind the slide rail to reduce friction. 2. Correct the gaps according to the regulations: t...
How to prevent people from falling into the elevator shaft
07-04-2020
Let Suxun Elevator Co.,Ltd. tell you how to prevent people from falling into the elevator shaft In recent years, with the rapid development of elevators, elevator accidents have occurred more and more. Among them, acci...
The hall door self-closing device should be effective
03-04-2020
The hall door self-closing device should be effective: each floor door is provided with a layer door self-closing device, that is to say: if the floor door is in the open state of the external force, if the car is...
The Safety device of elevator
28-03-2020
1. Mechanical safety device A.Safety rails with straight rail and overspeed brake can not only ensure that the elevator runs on the same vertical line, but also prevent the car from falling at high speed; B.Config...
Standard operation in the elevator maintenance process
20-03-2020
In the elevator maintenance process, in addition to the maintenance guardrail at the base station of the elevator, if the floor door is required to be opened on other floors and the car is not on the floor of the ...
Daily maintenance of the elevator door is very important
14-03-2020
Elevators are publicly used tools, and the most direct impact on public safety is the elevator doors. In design, the elevator hall door is tightly locked by the elevator door lock. Only when the elevator car runs ...